[求助]6410 usb问题
<p>在uboot命令行输入:</p><p>nand erase 300000 5000000</p><p>随后usb串口无法使用,<br/>SMDK6410 # usb reset</p><p>(Re)start USB...</p><p>USB: scanning bus for devices... </p><p> USB device not responding, giving up (status=80000000)</p><p>1 USB Device(s) found</p><p></p><p>请问出了什么问题?还有别的方法烧写根文件系统么?</p> <p></p><p></p><p>u-boot下 usb线通讯我移植过, 上位的dnw我也看过,其实原理很简单,不能用的情况可能有:</p><p>1. u-boot下的usb中断没开</p><p>2. 终端和PC是否没有接好</p><p></p><p>如果不行, 重启u-boot 试试</p>页:
[1]