合泰单片机初学者入门学习资料(页 1) - 单片机培训 - 学者之家电子论坛--打造电子工程师共同致富的平台 PDA,PDA论坛,手持PDA,手机PDA,PDA开发,PDA应用,PDA扩展,物流PDA,巡检PDA,电力PDA,烟草PDA,行业PDA

joudy 发表于 2008-10-22 09:27

合泰单片机初学者入门学习资料

[attach]2879[/attach]本章目标：    通过一个LED闪烁程序,带领学生快速掌握1.  HT-IDE3000开发系统的软件安装。2.  仿真器、PC机及DEMO板的连接。3． HE-IDE3000集成开发环境的使用方法。4.  IC烧录产品试运行等。5．产品在线升级烧录之方法 通过此章的学习使初学者先掌握HE48E系列单片机开发的全过程，通过我们后面的实战训练
再不断提高。 本章节中我们重在教会初学者掌握HE48E系列单片机开发的全过程，关键在于开发系统得培训。对于程序的训练只要求更改一数据,来配合工具的使用。
  此篇要求学员完成以下步骤操作
                 Step1:  首先安装HT-IDE3000集成开发软件       Step2:  将仿真器连到PC机的打印机口,同时椄上仿真器电源        Step3:  仿真器与Demo板相连        Step4:  运行HT-IDE3000,进入集成开发环境        Step5:  建立新项目到TestLED活页夹        Step6:  将TestLED.asm追加到项目中        Step7:  用Build命令编译文件        Step8:  运行程序,观察LED闪烁情况 Step9:  学员自己编辑修改程序，重新编译，运行程序,观察运行结果 Step10: 在HE-IDE3000 集成环境下48E系列MTP单片机的烧录方法 Step11: 烧录完毕进行产品试验 Step12: 用ISP cable 对48E系列MTP 单片机进行在线烧录

joudy 发表于 2008-10-22 09:28

一．    LED FLASH设计说明
 如下图所示,我们提供了一块DEMO板，实验板中CPU为48E50-Dip28,并在板中扩展了以下外围组件。1:  4x4 矩阵式key board。2:  8个LED。3:  4个共阳极7-seg数码管。4:  1个buzzer。5:  1颗<chmetcnv wst="on" tcsc="0" numbertype="1" negative="False" hasspace="False" sourcevalue="24" unitname="C">24c</chmetcnv>02。6：
红外发射电路。6：
红外接收电路。 所有扩展的外围组件均未与48E50联机,用户可根据自己需要将不同的组件连接到48E50的不同I/O口.以方便作实验用。现在我们就用这块实验板,来完成以下LED闪烁功能设计：1). LED从左到右逐渐变亮,即从左至右先是第一个LED亮,0.5秒后,第一个和二个LED同时亮,再过0.5秒1,2,3LED同时亮,依次类推直到8个LED同时亮。2). 8个LED同时亮后,又全部灭掉,又重复完成第1)步功能。

joudy 发表于 2008-10-22 09:29

我们在demo/test LED路径下给出此demo程序,下面给出此DEMO程序的设计说明,流程图及源代码。1.2 程序设计说明在此DEMO中,我们将8个LED的显示状态及LED的变化速率建在一个表中,我们只须将灯的状态取出映像到LED对应的PA口即可。用TIMER0作为时间基准,TIMER0设为0.1ms中断一次。再用RAM进行分频,分出0.1秒时间基准,在主程序中每0.1秒进行一次灯闪烁查巡,当速率减为0,改变一次灯之状态。<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">只要改变表中的速率值和<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">LED<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">状态值<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">,<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">可实现丰富的<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">LED<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">变化功能。

joudy 发表于 2008-10-22 09:31

二．HT集成开发环境实战练习                     2.1仿真器与PC机连接将仿真器连到PC几的打印机口。同时椄上仿真器电源(16v)。 2.2线路连接根据以上原理图大家可以将48E50的PA口连到8个LED上。即      PA0-->J5的L0    PA1-->J5的L1     PA2-->J5的L2   PA3-->J5的L3PA4-->J5的L4    PA5-->J5的L5     PA6-->J5的L6   PA7-->J5的L7 2.3 仿真器与DEMO板连接<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">仿真器与<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">DEMO<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">板连接时<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">,<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">排线的一端接到防真器的<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">HT48X<chmetcnv wst="on" tcsc="0" numbertype="1" negative="False" hasspace="False" sourcevalue="50" unitname="a">50A</chmetcnv>-1-28<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">的插座上<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">.<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">另一端连到<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">DEMO<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">板的插座上。<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">IC<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">插座上缺口与缺口对齐二．HT集成开发环境实战练习                     2.1仿真器与PC机连接将仿真器连到PC几的打印机口。同时椄上仿真器电源(16v)。 2.2线路连接根据以上原理图大家可以将48E50的PA口连到8个LED上。即      PA0-->J5的L0    PA1-->J5的L1     PA2-->J5的L2   PA3-->J5的L3PA4-->J5的L4    PA5-->J5的L5     PA6-->J5的L6   PA7-->J5的L7 2.3 仿真器与DEMO板连接<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">仿真器与<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">DEMO<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">板连接时<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">,<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">排线的一端接到防真器的<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">HT48X<chmetcnv wst="on" tcsc="0" numbertype="1" negative="False" hasspace="False" sourcevalue="50" unitname="a">50A</chmetcnv>-1-28<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">的插座上<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">.<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">另一端连到<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">DEMO<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">板的插座上。<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">IC<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">插座上缺口与缺口对齐

joudy 发表于 2008-10-22 09:31

2.4  HT-IDE3000集成开发环境软件安装(此步略,参看集成开发环境一章)  2.5 运行HT-IDE3000 集成开发软件当仿真器与PC机及DEMO板连接好后。运行桌面上的HT-IDE3000开始进行仿真。<shapetype id="_x0000_t75" stroked="f" filled="f" path="m@4@5l@4@11@9@11@9@5xe" opreferrelative="t" ospt="75" coordsize="21600,21600"><stroke joinstyle="miter"></stroke><formulas><f eqn="if lineDrawn pixelLineWidth 0"></f><f eqn="sum @0 1 0"></f><f eqn="sum 0 0 @1"></f><f eqn="prod @2 1 2"></f><f eqn="prod @3 21600 pixelWidth"></f><f eqn="prod @3 21600 pixelHeight"></f><f eqn="sum @0 0 1"></f><f eqn="prod @6 1 2"></f><f eqn="prod @7 21600 pixelWidth"></f><f eqn="sum @8 21600 0"></f><f eqn="prod @7 21600 pixelHeight"></f><f eqn="sum @10 21600 0"></f></formulas><path oconnecttype="rect" gradientshapeok="t" oextrusionok="f"></path><lock aspectratio="t" vext="edit"></lock></shapetype><shape id="_x0000_i1025" type="#_x0000_t75" style="WIDTH: 64.5pt; HEIGHT: 36.75pt;"><imagedata otitle="" src="file:///C:\DOCUME~1\judy\LOCALS~1\Temp\msohtml1\01\clip_image001.wmz"></imagedata></shape>   2.6 建立一个新项目       * 按下Project菜单并选择New命令。       * 输入项目名称并从组合框中选择此项目使用的单片机型号。         如下图项目名称为TEST；单片机型号为HT48E50

joudy 发表于 2008-10-22 09:32

按下ok 键则系统会要求设定Progect Option选项    如下图若在generate listing file框中打勾,则在系统编译链接时,会产生后缀为.lst的文件。<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">    <span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">同理要生成<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">.map<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">文件需在<span lang="EN-US" style="FONT-SIZE: 12pt; FONT-FAMILY: PMingLiU; mso-fareast-language: ZH-CN; mso-fareast-font-family: 宋体; mso-font-kerning: 1.0pt; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">generate map file<span style="FONT-SIZE: 12pt; FONT-FAMILY: 宋体; mso-fareast-language: ZH-CN; mso-font-kerning: 1.0pt; mso-ascii-font-family: PMingLiU; mso-hansi-font-family: PMingLiU; mso-bidi-font-family: "Times New Roman"; mso-ansi-language: EN-US; mso-bidi-language: AR-SA;">框中打勾。

︱︱冷酷︱︱ 发表于 2009-3-11 14:07

[img]http://www.wanlubao.com/pic/g/D6725_14.gif[/img]顶顶不错很好很好很好                        <a>\\\|///</a>                      \\  - -  //                       (  @ @  ) ┏━━━━━━━━oOOo-(_)-oOOo━┓ ┃网海茫茫,认识你是我的福份；    ┃ ┃网语缠绵,那是我们注定的缘份。  ┃ ┃                         Oooo  ┃ ┗━━━━━━━━ oooO━-(   )━┛                    (   )   ) /                     \ (   (_/                      \_) 如果说友谊的第一个法则是它必须得到培育，那么第二个法则就是：当第一个法则被忽略时，必须做到宽容。 [url=http://www.58627208.com/pages/Search.asp?FLid=3]纯水设备[/url]

joudy 发表于 2009-6-10 10:31

[em03]

lycing 发表于 2010-3-10 13:18

gfdgggggggggggggggggggggggg

页: [1]

学者之家电子论坛--打造电子工程师共同致富的平台's Archiver

合泰单片机初学者入门学习资料

302 Found